February 25Feb 25 Anyone know how to fix a sticking "JOG" button (thats the one on the bottom right which scrolls through the menu) on a T 6 K transmitter??Thanks in advanceDerek P.
February 25Feb 25 My guess would be a failed microswitch or its solder joints. Is it flakey or completely unresponsive?
February 25Feb 25 4 hours ago, Derek Priestley said:Anyone know how to fix a sticking "JOG" button (thats the one on the bottom right which scrolls through the menu) on a T 6 K transmitter??Thanks in advanceDerek P.They are a common fault on these and I don't think there's a cure other than post it back to Ripmax..
February 25Feb 25 I'd think it might be fixable with right spare+technique... But if you can't get it repaired and have to just replace it Derek - which would be a shame - feel free to scrap it in my direction! 😀 (I use Spektrum myself, so if I fixed then I'd sell for charity)
February 26Feb 26 My limited experience with Futaba would suggest that they don’t like damp and corrode easily. Expect component failure.
February 26Feb 26 Author Update.Without switching on the TX, I wiggled and woggled the JOG button and it stopped sticking! So, I switched on and I was able to scroll through the functions and get to the "Link" section I pressed on that & the beeps came on. I pluged in the RX and a green light came on!! Fantastic! I plugged the Rx into my boat and all working!!Many thanks everyone for your suggestions.I've tried it again this morning and it still works.D
February 26Feb 26 I had two issues with my T6K within warranty, and was warned off a third claim, saying it's water ingress. A bit of thought and I realised it's even run off from the boat as you lift it out. As a consequence, I never use mine now without it being in the muff. No problems since
Create an account or sign in to comment