VENTI for sale

The boat comes with A rig , B rig and rig box but no stand.

The certificate includes a the C rig, so no need to remeasure.

The boat is hull number 123 and arrived to me in Nov 24

Both rigs have custom built variable geometry ball raced goosnecks and Sailboat RC monofilm sails.

Included are two spare hatch covers and a spare bow bumper.

The boat has a few custom modifications below deck allowing better weight distribution and the use of a spiral drum. The winch is a twin wire Red Ant Stinger with an XT30 battery connector and the Rudder servo is a Hitec waterproof type.

As per many new designs I have fitted a deck eye in place of the mainsheet post, thus lowering the main boom by 12 mm. (the post can still be used and the boat sailed in Factory format should you wish)

There are two small nicks in the trailing edge of the fin and a number of areas of Gel coat crazing that do not affecting performance.

The Venti construction of a vinylesta gel coat over the more flexible epoxy glass fibre of the hull, means that all Venti's have gel coat glazing somewhere.

The green stripe is cellulose spray paint to make the boat more visible. It can be removed with cellulose thinners and does not cover any damage.

The deck patch material on the fore deck covers the access hatch for the spiral drum sheeting lines.

If you have any questions please feel free to give me a call.

£2300 with a matched Futaba TK6 transmitter and receiver.

or £2150 without

I live in Filey but am happy to drive up to 100 miles to either deliver the boat or meet you half way.

Thanks for loo

Edited 5 hours ago5 hr by Roger Crates